The professional tyre buffer makes use of an abrasive wheel to scuff/rough an area in a tyre that needs repair.
One hand operation with lever lock dead man switch for safety.
A compressor is required with an air flow delivery of at least 128 l/min at 6.3 Bar to make use of the tyre buffer.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
Replacement tyre buff:AT0022-01
- Easy to replace tyre buff
- Safety pin on the dead man switch prevents accidental starting
- Lightweight and compact
- Scuff/rough out areas on a tyre for repair
|consider safety for your health and the people around you|
General safety suggestions:
It is advisable to always have the following items nearby and in a good condition
|Working pressure||6.3 Bar|
|Average air consumption||128 l/min|
|Suggested minimum compressor HP||1 HP|
|Free speed||2 500 rpm|