Model: SG A182
AirCraft Airbrush Kit 0.5mm Nozzle (SG A182)
At a Glance: 0.5mm airbrush kit for higher flow, smoother coverage and more forgiving spraying with primers and thicker paints.
Need an airbrush that covers faster and clogs less? The AirCraft SG A18..
R 1,365.05
Ex VAT:R 1,187.00
Model: SG A182-A-184
AirCraft O-ring Set For SG-182 / SG-182A / SG-184 (SG-A182-A-184)
At a Glance: O-ring replacement set compatible with SG-182, SG-182A & SG-184 Airbrushs
A Airbrush can look perfect on the outside and still misbehave if the seals are tired....
R 188.60
Ex VAT:R 164.00
Model: SG A208
AirCraft Airbrush Kit 0.2mm (SG A208)
At a Glance: Ultra-fine 0.2mm airbrush for crisp detail lines, tight control and smooth, delicate shading.
For the jobs where “close enough” isn’t close enough, the AirCraft SG A208 Airbrush Kit (0.2mm) ste..
R 1,421.98
Ex VAT:R 1,236.50
Model: SG A209
AirCraft SG-A209 Airbrush Kit 0.2mm – For Nail Painting & Fine Detail Work
At a Glance: 0.2mm detail airbrush kit for fine lines, soft fades and precision colour control in nail art.
Nail art is basically precision painting in hard ....
R 953.35
Ex VAT:R 829.00
Model: SG A330-1
AirCraft Replacement Cup For The SG-A330 (SG-A330-1)
At a Glance: Replacement paint cup designed to fit the AirCraft SG-A330 spray gun
A spray gun cup takes a beating—solvents, drops, over-tightening, dried paint… it all adds up. The AirCraft..
R 697.48
Ex VAT:R 606.50
Model: SG ADA01
Adaptor for 1/8 BSP airbrush hose
This adaptor allows for the braided 1/8 BSP airbrush hoses to connect to the
M5 thread on the SG A138 airbrush.....
R 30.82
Ex VAT:R 26.80
Model: SG AH07
AirCraft Hose Rubber For Airbrush 2.5m 1/4 X 1/4 F f
At a Glance; Rubber airbrush hose – 1/4" BSP female to 1/4" BSP female, 2.5m long
When you want a hose that feels solid, flexes well, and handles everyday workshop life without drama, rubber ..
R 150.65
Ex VAT:R 131.00
Model: SG BD51-52
AirCraft Hose Tail 1/8f X 5mm M
At a Glance; 1/8" BSP female thread to 5mm hose tail fitting for airbrush air line connections
Small fitting, big job. The AirCraft SG-BD51-52 Hose Tail is a practical connector designed to join a 5mm air hose to..
R 47.38
Ex VAT:R 41.20
Model: SG HL01
Airbrush holder - table edge clamp
Holds up to 4 airbrushes and clamps to a table edge.
Includes bracket to mount an inline air regulator.
Suitable for all kinds of
airbrushes.....
R 354.78
Ex VAT:R 308.50
Model: SG HL02
Airbrush holder - table top with suction feet
Holds up to 4 airbrushes at a time.
The steel base has 4 suction cups to secure it on a smooth table top.
Suitable for all kinds of
airbrushes.....
R 354.78
Ex VAT:R 308.50
Model: SG NE01
AirCraft Needle For A182 0.5mm (SG NE01)
At a Glance: Replacement needle for AirCraft Airbrush A182 0.5mm setup—brings back smooth flow and consistent spray control.
A needle is the quiet hero of a good spray finish: when it’s bent, worn, or ni..
R 142.60
Ex VAT:R 124.00
Model: SG NE02
AirCraft Needle For A130 / A180 0.3mm (SG NE02)
At a Glance: Replacement 0.3mm needle for AirCraft A130 / A180 airbrushes—brings back smooth flow and crisp detail control.
A tiny bend on a needle can turn a perfect spray session into a mystery ..
R 142.60
Ex VAT:R 124.00