Model: SG AD01
Air Duster/Blow Gun
Air Inlet: 1/4"M BSP
Standard nozzle: &O/;2.0mm
Working pressure: 0-10Bar/0-150PSI
Air dusters and blow guns are tools used to remove dust, debris, and moisture from various surfaces and equipment.
They w..
R 112.76
Ex VAT:R 98.05
Model: SG AD04
Air Duster/Blow GunLong Nozzle
Air Inlet: 1/4"M BSP
Nozzle diameter: 4.0mm
Nozzle length: 260mm
Working pressure: 0-10Bar/0-150PSI
Air dusters and blow guns are tools used to remove dust, debris, and moisture from various su..
R 164.16
Ex VAT:R 142.75
Model: SG AD05
Mini Air Duster/Blow Gun
Air Inlet: 1/4"M BSP
Air consumption rate: 6 CFM (170l/min)
Output increase rate: 12CFM (340/min)
Working pressure: 0-10Bar/0-150PSI
Connector Type: ARO
Air dusters and blow guns are tools used to ..
R 155.71
Ex VAT:R 135.40
Model: SG ATC-09
Tyre chuck for &O/;8mm ID hose
The tyre chuck fits on a tyre inflator to hold onto a tyre's valve while
inflating it.
Replacement tyre chuck for
SG STG05....
R 55.37
Ex VAT:R 48.15
Model: SG SS-28
Tyre chuck 1/4 BSP
The tyre chuck needs to be pressed onto a tyre's valve to inflate it.
Combine the tyre chuck with a hose tail fitting, fitted to a hose to inflate a tyre.....
R 37.49
Ex VAT:R 32.60
Model: SG WG01
Paraffin wash gun
Designed to connect to a compressor and to be fill with detergents, non-corrosive cleaning agents or degreasants to clean an engine, rims or hand tools around the workshop.
The wash gun works by allowing you to get int..
R 199.99
Ex VAT:R 173.90
Model: SPC10103
Sanding block
Ergonomic sanding block.
SIZE:
&o/;125mm
CLAMP METHOD: Hook and loop
Application:
Rectangular palm sander with an ergonomic design that fits the user's hand for
added comfort and reduced fatigue.
The round hook an..
R 121.79
Ex VAT:R 105.90
Model: STAP003
21-Gauge Staples — 8 mm (Box of 5 000)
These 21-gauge staples, with 8 mm legs and supplied in a box of 5 000, are ideal for sewing light fabrics, securing thin panels, attaching linings and trim where deeper penetration is undesirable. Their fine ga..
R 93.73
Ex VAT:R 81.50
Model: STAP004
21-Gauge Staples — 10 mm (Box of 5 000)
These 21-gauge staples with a 10 mm leg length (pack of 5 000) are designed for securing fabrics, trim backs, thin plywood and other light-duty interior work. They offer enough bite without excessive penetrati..
R 101.20
Ex VAT:R 88.00
Model: STAP005
21-Gauge Staples — 12 mm (Box of 5 000)
These 21-gauge staples with 12 mm leg length (supplied in a 5 000 count pack) are ideal for light interior applications such
as panel backing, trim, upholstery and soft wood fixings. They provide sufficient..
R 109.25
Ex VAT:R 95.00
Model: SANDBL-50-2
SAND BLAST SAND B60 50 KG FINE & GEN.PURPOSE....
R 370.42
Ex VAT:R 322.10
In Stock Soon
Model: SG WG01P
WASH / PARAFFIN GUN BLISTER PACK....
R 228.85
Ex VAT:R 199.00