The professional grade pneumatic oil is filled inside a lubricator. The oil is used to extend life, reduce wear and prevents corrosion on moving parts inside pneumatic power tools.
Ideally, a lubricator should be fitted within a 15m distance from the pneumatic tool.
Pneumatic power tools that need lubrication:
- Impact wrenches
- Ratchet wrenches
- Grinders/Die grinders
- Nail/Staple guns
- Jack hammers
- Needle scalers
Do not use with spray guns.
- Effective even at low temperatures
- Provides protection against corrosion and wear
- Professional grade
- Use with in-line lubricators, example SG L01
- Apply one drop of oil for every strip of nails or staples when using a pneumatic nail gun or staple gun. Apply at the air inlet.
DO NOT use a lubricator fitted to a spray gun. The oil will mix with the paint and create 'fish eyes'.
|Oil type||Professional grade general purpose pneumatic oil|
|Viscosity||40°C, mm²/s ≥ 25|