Random orbital sander - Ø 150mm
Professional pneumatic random orbital sander with Ø 150mm hook and loop sanding pad.
Heavy duty ball bearing construction for improved lower vibration performance.
A compressor is required with an air flow delivery of at least 325 l/min at 6.3 Bar to make use of the sander.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
Dust extraction hose included.
Recommended replacement backing pad:FLEX 32320 SPC00107
- Heavy duty ball bearing construction for improved lower vibration performance
- Dead man switch for added safety
- Dust extraction hose included
- Automotive sanding and polishing
- Woodwork finishing
|consider safety for your health and the people around you|
General safety suggestions:
It is advisable to always have the following items nearby and in a good condition
|Working pressure||6.3 Bar|
|Free speed||10 000 rpm|
|Average air consumption||325 l/min|
|Suggested minimum compressor HP||5.5 HP|
|Backing pad||Ø150mm, 6 holes|
Download the Manual:
View the Manual:
Download the Spec Sheet:
View the Spec Sheet: