Professional needle scaler for removing paint, rust or welding slag.
Can be used on textured surfaces, example checker plate.
A compressor is required with an airflow delivery of at least 114 l/min at 6.3 Bar to make use of the needle scaler.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
- 12 needles
- Dead man switch for added safety
- Low air consumption
- Removes rust, old paint or welding slag
- Remove rust on steel
|consider safety for your health and the people around you|
General safety suggestions:
It is advisable to always have the following items nearby and in a good condition
|Working pressure||6.3 Bar|
|Blows per minute||2 800 Bpm|
|Average air consumption||114 l/min|
|Suggested minimum compressor HP||1 HP|