Model: SB1230
AirCraft Reducer Brass 3/8" x 1/4" M/F Conical (SB1230)
At a Glance: 3/8" to 1/4" male/female conical brass reducer for compact pneumatic connections
When your air-line setup is 99% perfect… except for that one fitting that refuses to mat..
R 33.87
Ex VAT:R 29.45
Model: SB1232
AirCraft Reducer Brass 1/2" x 1/4" M/F Conical (SB1232)
At a Glance: 1/2" to 1/4" male/female conical brass reducer for compact pneumatic connections
Pneumatic setups are all about flow, control and clean connections—until you hit that on..
R 59.34
Ex VAT:R 51.60
Model: SB1243
AirCraft Manifold Brass 1/4" x 1/4" F/F (SB1243)
At a Glance: 1/4" female-to-female brass manifold fitting for tidy pneumatic connections
Sometimes the most useful “tool” in a workshop is a small fitting that makes everything line up prop..
R 34.56
Ex VAT:R 30.05
Model: SB1246
AirCraft Reducing Manifold Brass 1/8" x 1/4" F/F (SB1246)
At a Glance: 1/8" to 1/4" female-to-female brass reducing manifold for stepping between air-line sizes
Sometimes you don’t need another adaptor stack—you need one proper connector ..
R 29.15
Ex VAT:R 25.35
Model: SB1250
AirCraft Reducing Manifold Brass 1/4" x 1/2" F/F (SB1250)
At a Glance: 1/4" to 1/2" female-to-female brass reducing manifold for stepping between air-line sizes
When a 1/4" port needs to join into a 1/2" air-line setup, you want a connect..
R 75.10
Ex VAT:R 65.30
Model: SB1251
AirCraft Reducing Manifold Brass 3/8" x 1/2" F/F (SB1251)
At a Glance: 3/8" to 1/2" female-to-female brass reducing manifold for stepping between air-line sizes
When your air system needs a neat step-up from 3/8" to 1/2", a proper reducin..
R 82.80
Ex VAT:R 72.00
Out Of Stock
Model: SG PTFE12-2P
AirCraft PTFE Tape 12mm x 0.075mm x 10m Roll 2 Piece Pack (SG PTFE12-2P)
At a Glance: 2-roll PTFE thread seal tape pack—12mm wide, 0.075mm thick, 10m per roll for leak-resistant threaded joints.
A tiny leak in a threaded joint can waste air, dr..
R 62.10
Ex VAT:R 54.00
Model: SG SS-15
Aluminium manifold - 3 way splitter 1/4 BSP
The manifold is fitted when multiple connection .s are required.
A splitter manifold has an improved distribution of air compared to an inline manifold.
The back connection thread is 1/4 BSP...
R 29.42
Ex VAT:R 25.58
Model: SG SS-26
Hose repair kit - &O/; 8mm ID
The hose repair kit allows for the repair of compressor hose with an 8mm internal diameter.
The kit includes a double union when two hoses are joined together. Also includes (x2) hose tails when it&s needed t..
R 110.98
Ex VAT:R 96.50
Model: SG10020
AirCraft Connector ARO Type 1/4" BSP Female Bulk (SG10020)
At a Glance: ARO-type connector with 1/4" BSP Female (F) thread for quick coupler setups
Standardising your air lines is one of those small workshop upgrades that pays you back every sing..
R 13.86
Ex VAT:R 12.05
Model: SG10070
AirCraft Connector ARO Type 10mm Hosetail Bulk (SG10070)
At a Glance: ARO-type quick-connect connector with 10mm hose tail for rapid air line connections
For higher-flow air lines and sturdy workshop hose setups, the right hose-end connector make..
R 27.95
Ex VAT:R 24.30
Model: SG10262
AirCraft T-Type Hose Connector 8mm (Bulk) - SG10262
At a Glance: 8 mm barbed T-piece connector for 3-way hose connections
Need to branch a single hose line into two, or neatly join three 8 mm hose runs? The AirCraft SG10262 T-Type Hose Connecto..
R 55.37
Ex VAT:R 48.15