Model: SG A182
AirCraft Airbrush Kit 0.5mm Nozzle (SG A182)
At a Glance: 0.5mm airbrush kit for higher flow, smoother coverage and more forgiving spraying with primers and thicker paints.
Need an airbrush that covers faster and clogs less? The AirCraft SG A18..
R 1,309.16
Ex VAT:R 1,138.40
Model: SG A182-A-184
AirCraft O-ring Set For SG-182 / SG-182A / SG-184 (SG-A182-A-184)
At a Glance: O-ring replacement set compatible with SG-182, SG-182A & SG-184 Airbrushs
A Airbrush can look perfect on the outside and still misbehave if the seals are tired....
R 180.49
Ex VAT:R 156.95
Model: SG A208
AirCraft Airbrush Kit 0.2mm (SG A208)
At a Glance: Ultra-fine 0.2mm airbrush for crisp detail lines, tight control and smooth, delicate shading.
For the jobs where “close enough” isn’t close enough, the AirCraft SG A208 Airbrush Kit (0.2mm) ste..
R 1,363.73
Ex VAT:R 1,185.85
Model: SG A209
AirCraft SG-A209 Airbrush Kit 0.2mm – For Nail Painting & Fine Detail Work
At a Glance: 0.2mm detail airbrush kit for fine lines, soft fades and precision colour control in nail art.
Nail art is basically precision painting in hard ....
R 914.14
Ex VAT:R 794.90
Model: SG A330-1
AirCraft Replacement Cup For The SG-A330 (SG-A330-1)
At a Glance: Replacement paint cup designed to fit the AirCraft SG-A330 spray gun
A spray gun cup takes a beating—solvents, drops, over-tightening, dried paint… it all adds up. The AirCraft..
R 668.73
Ex VAT:R 581.50
Model: SG ADA01
Adaptor for 1/8 BSP airbrush hose
This adaptor allows for the braided 1/8 BSP airbrush hoses to connect to the
M5 thread on the SG A138 airbrush.....
R 29.56
Ex VAT:R 25.70
Model: SG AH07
AirCraft Hose Rubber For Airbrush 2.5m 1/4 X 1/4 F f
At a Glance; Rubber airbrush hose – 1/4" BSP female to 1/4" BSP female, 2.5m long
When you want a hose that feels solid, flexes well, and handles everyday workshop life without drama, rubber ..
R 144.27
Ex VAT:R 125.45
Model: SG BD51-52
AirCraft Hose Tail 1/8f X 5mm M
At a Glance; 1/8" BSP female thread to 5mm hose tail fitting for airbrush air line connections
Small fitting, big job. The AirCraft SG-BD51-52 Hose Tail is a practical connector designed to join a 5mm air hose to..
R 45.37
Ex VAT:R 39.45
Model: SG HL01
Airbrush holder - table edge clamp
Holds up to 4 airbrushes and clamps to a table edge.
Includes bracket to mount an inline air regulator.
Suitable for all kinds of
airbrushes.....
R 340.23
Ex VAT:R 295.85
Model: SG HL02
Airbrush holder - table top with suction feet
Holds up to 4 airbrushes at a time.
The steel base has 4 suction cups to secure it on a smooth table top.
Suitable for all kinds of
airbrushes.....
R 340.23
Ex VAT:R 295.85
Model: SG NE01
AirCraft Needle For A182 0.5mm (SG NE01)
At a Glance: Replacement needle for AirCraft Airbrush A182 0.5mm setup—brings back smooth flow and consistent spray control.
A needle is the quiet hero of a good spray finish: when it’s bent, worn, or ni..
R 136.33
Ex VAT:R 118.55
Model: SG NE02
AirCraft Needle For A130 / A180 0.3mm (SG NE02)
At a Glance: Replacement 0.3mm needle for AirCraft A130 / A180 airbrushes—brings back smooth flow and crisp detail control.
A tiny bend on a needle can turn a perfect spray session into a mystery ..
R 136.33
Ex VAT:R 118.55