AirCraft Needle For A130 / A180 0.3mm (SG NE02)
At a Glance: Replacement 0.3mm needle for AirCraft A130 / A180 airbrushes—brings back smooth flow and crisp detail control.
A tiny bend on a needle can turn a perfect spray session into a mystery ..
Paint pot 20 l - Automatic mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufactur..
Paint pot 40 l - Manual mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufacturer&..
Paint pot 40 l - Automatic mix
The paint pot allows for a higher volume of paint to be sprayed using a pressure feed spray gun.
Care should be taken not to use catalyst/hardener based media (paints).
Always refer to the paint manufactur..
HVLP spray gun 1.4mm
The success behind an HVLP spray gun, is the low amount of overspray.
This is
achieved by having an improved atomization, by using a lower air pressure and a
higher volume of airflow.
Large pattern width, ideal ..
AirCraft Nozzle Kit For Airless Sprayer PPK800 (SG PPK800-106)
At a Glance: Replacement nozzle kit for the AirCraft PPK800—helps restore a clean fan pattern and consistent airless coverage.
In airless spraying, the nozzle/tip is the boss of the..
10 l paint pot with 2m hose and spray gun
The spray gun is excellent for commercial painting where a large amount of spraying is required.
The paint pot allows for a higher volume of paint to be sprayed using the
pressure feed spray gun..
Ball valve - 1/4 BSP
The ball valve is a must for setting up a pneumatic air line system as it allows to control the flow as a switch, to be able to control when air is flowing or when it is shut-off.
Unlike screw type valves, ball valves..
AirCraft PU Fitting Straight Stud With O-Ring 4mm x 1/4" BSP Male (SG SPC04-G02)
At a Glance: Push-in straight stud fitting for 4mm pneumatic tube to 1/4" BSP male thread, with an O-ring for a reliable seal.
The AirCraft SG SPC04-G02 ....