Model: SG PPK800-20
PLASTIC SEALING GASKET FOR AIRLESS SPRAYER....
R 431.25
Ex VAT:R 375.00
Model: SG PPK800-45
V-PACKING LEATHER FOR AIRLESS SPRAYER....
R 120.75
Ex VAT:R 105.00
Model: SG PPPQ2U
Pressure feed spray gun for paint pots - &O/; 2.0mm
The spray gun is excellent for commercial painting where a large amount of spraying is required.
Care should be taken not to use pressure feed spray guns with catalyst/hardener based p..
R 1,129.88
Ex VAT:R 982.50
Model: SG PPX13
AirCraft Air Gauge 85psi / 6bar 1/4" Male Bottom Fit For SG PP Paint Pots (SG PPX13)
At a Glance: Dual-scale pressure gauge (0–85psi / 0–6bar) with 1/4" male bottom fitting—fits SG PP paint pots for accurate pressure monitoring.
Diall....
R 586.50
Ex VAT:R 510.00
Model: SG PPX4001S
Pressure feed spray gun and hose for paint pot - &O/; 2.2mm
The spray gun is excellent for commercial painting where a large amount of spraying is required.
7.5m red air hose and black fluid hose included
Care should be taken not to ..
R 1,669.80
Ex VAT:R 1,452.00
Model: SG PQ2
High pressure spray gun - &O/; 2.0 mm
The very first spray guns were high pressure spray guns. The design mostly
relies on air pressure to transfer paint to the surface.
Fully adjustable pattern width making use of a high quality stainl..
R 418.60
Ex VAT:R 364.00
Model: SG PS6
Underbody coating gun
Convenient and easy to use plastic pipe can be used with the nozzle to adapt to various coating requirements.
The gun has a threaded collar which allows for direct attachment to standard
one litre cans.
....
R 234.03
Ex VAT:R 203.50
Model: SG PTFE12-2P
AirCraft PTFE Tape 12mm x 0.075mm x 10m Roll 2 Piece Pack (SG PTFE12-2P)
At a Glance: 2-roll PTFE thread seal tape pack—12mm wide, 0.075mm thick, 10m per roll for leak-resistant threaded joints.
A tiny leak in a threaded joint can waste air, dr..
R 64.86
Ex VAT:R 56.40
Model: SG R01
Inline regulator for a spray gun
The regulator is fitted with a gauge to precisely set the required pressure of the spray gun.
Simply connect the inline regulator on the bottom of a spray gun.
Recommended to combine with
SG F01 wa..
R 198.38
Ex VAT:R 172.50
Model: SG R180
In-line regulator 1/4 BSP
The in-line regulator is used to increase or decrease the air pressure for the
required air tool or equipment. The set pressure can be viewed on the pressure
gauge.
Visible arrows are on the outer body of the..
R 418.60
Ex VAT:R 364.00
Model: SG R200
In-line regulator 1/2 BSP
The in-line regulator is used to increase or decrease the air pressure for the
required air tool or equipment. The set pressure can be viewed on the pressure
gauge.
Visible arrows are on the outer body of the..
R 814.20
Ex VAT:R 708.00
Model: SG SPC04-G01
AirCraft PU Fitting Straight Stud With O-Ring 4mm x 1/8" BSP Male (SG SPC04-G01)
At a Glance: Push-in straight stud fitting for 4mm pneumatic tube to 1/8" BSP male thread, with an O-ring for a reliable seal.
The AirCraft SG SPC04-G01 ....
R 15.64
Ex VAT:R 13.60