Model: SB1233
AirCraft Reducer 1/2" x 3/8" M/F Conical (SB1233)
At a Glance: 1/2" to 3/8" male/female conical reducer for neat pneumatic connections
Air systems are wonderfully simple… until two fittings disagree about what size the....
R 50.14
Ex VAT:R 43.60
Model: SB1236
AirCraft Reducer Brass 3/4" x 1/2" M/F Conical (SB1236)
At a Glance: 3/4" to 1/2" male/female conical brass reducer for neat compressed-air connections
When a high-flow section of your air system needs to connect to a ....
R 97.98
Ex VAT:R 85.20
Model: SB1247
AirCraft Reducing Manifold 1/8" x 3/8" F/F (SB1247)
At a Glance: 1/8" to 3/8" female-to-female reducing manifold for stepping between air-line sizes
Air systems don’t always follow a single neat standard—sometimes you’....
R 39.10
Ex VAT:R 34.00
Model: SB1248
AirCraft Reducing Manifold Brass 1/8" x 1/2" F/F (SB1248)
At a Glance: 1/8" to 1/2" female-to-female brass reducing manifold for stepping between air-line sizes
Sometimes a compact air component needs to connect into a....
R 58.88
Ex VAT:R 51.20
Model: SB1252
AirCraft Reducing Manifold Brass 1/2" x 3/4" F/F (SB1252)
At a Glance: 1/2" to 3/4" female-to-female brass reducing manifold for stepping up air-line capacity
When your air system needs to transition from a 1/2" c....
R 106.03
Ex VAT:R 92.20
Model: SB1253
AirCraft Manifold Brass 3/4" x 3/4" F/F (SB1253)
At a Glance: 3/4" female-to-female brass manifold fitting for strong, high-flow air-line connections
When you’re working with larger air lines, you need fittings that are sol....
R 117.88
Ex VAT:R 102.50
Model: SBM1257
AirCraft Hose Tail Connector Brass – 1/4" Male x 6mm (SBM1257)
At a Glance: 1/4" Male Thread to 6mm Hose Tail in Solid Brass
Small hose, big job—this AirCraft brass hose tail connector is a neat way to join a 6mm hose to a 1/4"....
R 31.28
Ex VAT:R 27.20
Model: SBM1259
AirCraft Hose Tail Connector Brass – 1/4" Male x 10mm (SBM1259)
At a Glance: 1/4" Male Thread to 10mm Hose Tail in Solid Brass
When you’re running a larger hose and want a dependable threaded connection, the AirCraft SBM1259 is a wo....
R 34.73
Ex VAT:R 30.20
Model: SBM1261
AirCraft Hose Tail Connector Brass – 1/4" Male x 13mm (SBM1261)
At a Glance: 1/4" Male Thread to 13mm Hose Tail in Solid Brass
When your air line setup runs a larger hose and you want a dependable threaded connection, the AirCraft S....
R 62.79
Ex VAT:R 54.60
Model: SD42002
Pressure switch - Four way, single phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Push-in (nylon tube)
Thread: 1/4 BSP
Ports: ..
R 533.60
Ex VAT:R 464.00
Model: SD42006
Pressure switch - Four way, three phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Three phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: Four way
..
R 713.58
Ex VAT:R 620.50
Model: SD50R-2
Pressure gauge - 1/4 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;50mm
Pressure range: 0 - 16Bar
Thread: 1/4 BSP
Position: Rear
BSP: Brittish Standard Pipe thread....
R 234.03
Ex VAT:R 203.50