Model: SBM1258P
AirCraft Hose Tail Connector Brass – 1/4" Male x 8mm (1pc Pack) (SBM1258P)
At a Glance: 1/4" Male Thread to 8mm Hose Tail – Convenient 1pc Pack
For quick fixes and small installs where you only need one connector, the AirCraft SBM1258P is the..
R 41.46
Ex VAT:R 36.05
Model: SBM1259
AirCraft Hose Tail Connector Brass – 1/4" Male x 10mm (SBM1259)
At a Glance: 1/4" Male Thread to 10mm Hose Tail in Solid Brass
When you’re running a larger hose and want a dependable threaded connection, the AirCraft SBM1259 is a workshop-rea..
R 33.12
Ex VAT:R 28.80
Model: SBM1259P
AirCraft Hose Tail Connector Brass – 1/4" Male x 10mm (1pc Pack) (SBM1259P)
At a Glance: 1/4" Male Thread to 10mm Hose Tail – Convenient 1pc Pack
For those “just need one” jobs, the AirCraft SBM1259P gives you a solid brass hose tail connecto..
R 44.79
Ex VAT:R 38.95
Model: SBM1260
AirCraft Hose Connector Brass – 1/4" Male x 12mm (SBM1260)
At a Glance: 1/4" Male Thread to 12mm Hose Connection in Solid Brass
When you’re running a larger hose and want a dependable threaded join, the AirCraft SBM1260 is a tough, no-nonsens..
R 43.64
Ex VAT:R 37.95
Model: SBM1260P
AirCraft Hose Tail Connector Brass – 1/4" Male x 12mm (1pc Pack) (SBM1260P)
At a Glance: 1/4" Male Thread to 12mm Hose Tail – Convenient 1pc Pack
When you only need one fitting to complete an install or sort a quick repair, the AirCraft SBM12..
R 50.49
Ex VAT:R 43.90
Model: SBM1261
AirCraft Hose Tail Connector Brass – 1/4" Male x 13mm (SBM1261)
At a Glance: 1/4" Male Thread to 13mm Hose Tail in Solid Brass
When your air line setup runs a larger hose and you want a dependable threaded connection, the AirCraft SBM1261 is ..
R 60.20
Ex VAT:R 52.35
Model: SBM1261P
AirCraft Hose Tail Connector Brass – 1/4" Male x 13mm (1pc Pack) (SBM1261P)
At a Glance: 1/4" Male Thread to 13mm Hose Tail – Convenient 1pc Pack
When you only need one connector to finish an install or handle a quick repair, the AirCraft SBM..
R 61.30
Ex VAT:R 53.30
Model: SD40R-1
Pressure gauge - 1/8 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;40mm
Pressure range: 0 - 16Bar
Thread: 1/8 BSP
Position: Rear
BSP: British Standard Pipe thread....
R 218.50
Ex VAT:R 190.00
Model: SD40R-2
Pressure gauge - 1/4 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;40mm
Pressure range: 0 - 16Bar
Thread: 1/4 BSP
Position: Rear
BSP: British Standard Pipe thread....
R 224.25
Ex VAT:R 195.00
Model: SD42001
Pressure switch - One way, single phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Push-in (nylon tube)
Thread: 1/4 BSP
Ports: O..
R 488.75
Ex VAT:R 425.00
Model: SD42002
Pressure switch - Four way, single phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Push-in (nylon tube)
Thread: 1/4 BSP
Ports: ..
R 511.75
Ex VAT:R 445.00
Model: SD42003
Pressure switch - One way, single phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: One way
..
R 534.75
Ex VAT:R 465.00