Model: SBM1260P
AirCraft Hose Tail Connector Brass – 1/4" Male x 12mm (1pc Pack) (SBM1260P)
At a Glance: 1/4" Male Thread to 12mm Hose Tail – Convenient 1pc Pack
When you only need one fitting to complete an install or sort a quick repair, the AirCraft SBM12..
R 50.49
Ex VAT:R 43.90
Model: SBM1261
AirCraft Hose Tail Connector Brass – 1/4" Male x 13mm (SBM1261)
At a Glance: 1/4" Male Thread to 13mm Hose Tail in Solid Brass
When your air line setup runs a larger hose and you want a dependable threaded connection, the AirCraft SBM1261 is ..
R 60.20
Ex VAT:R 52.35
Model: SBM1261P
AirCraft Hose Tail Connector Brass – 1/4" Male x 13mm (1pc Pack) (SBM1261P)
At a Glance: 1/4" Male Thread to 13mm Hose Tail – Convenient 1pc Pack
When you only need one connector to finish an install or handle a quick repair, the AirCraft SBM..
R 61.30
Ex VAT:R 53.30
Model: SD40R-1
Pressure gauge - 1/8 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;40mm
Pressure range: 0 - 16Bar
Thread: 1/8 BSP
Position: Rear
BSP: British Standard Pipe thread....
R 218.50
Ex VAT:R 190.00
Model: SD40R-2
Pressure gauge - 1/4 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;40mm
Pressure range: 0 - 16Bar
Thread: 1/4 BSP
Position: Rear
BSP: British Standard Pipe thread....
R 224.25
Ex VAT:R 195.00
Model: SD42001
Pressure switch - One way, single phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Push-in (nylon tube)
Thread: 1/4 BSP
Ports: O..
R 488.75
Ex VAT:R 425.00
Model: SD42002
Pressure switch - Four way, single phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Push-in (nylon tube)
Thread: 1/4 BSP
Ports: ..
R 511.75
Ex VAT:R 445.00
Model: SD42003
Pressure switch - One way, single phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: One way
..
R 534.75
Ex VAT:R 465.00
Model: SD42004
Pressure switch - Four way, single phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Single phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: Four wa..
R 563.50
Ex VAT:R 490.00
Model: SD42005
Pressure switch - One way, three phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Three phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: One way
P..
R 603.75
Ex VAT:R 525.00
Model: SD42006
Pressure switch - Four way, three phase
The pressure switch is used to start and stop a compressor to maintain pressure in a pneumatic system.
Voltage: Three phase
Unloader connection Brass ferrule
Thread: 1/4 BSP
Ports: Four way
..
R 684.25
Ex VAT:R 595.00
Model: SD50R-1
Pressure gauge - 1/8 BSP Rear
The pressure gauge is an instrument showing the pressure in a pneumatic system.
Dial diameter: &O/;50mm
Pressure range: 0 - 16Bar
Thread: 1/8 BSP
Position: Rear
BSP: Brittish Standard Pipe thread....
R 212.75
Ex VAT:R 185.00