Model: SG ADA01
Adaptor for 1/8 BSP airbrush hose
This adaptor allows for the braided 1/8 BSP airbrush hoses to connect to the
M5 thread on the SG A138 airbrush...
R 30.82
Ex VAT:R 26.80
Model: SG BD-470
AirCraft Air Brush Nozzle Cleaning Needle
At a Glance; Precision nozzle cleaning needle for clearing dried paint from airbrush nozzle openingss and fine passages
Airbrush nozzles operate in the realm of microscopic drama—tiny openings, tiny tol..
R 95.45
Ex VAT:R 83.00
Model: SG BD-18
AirCraft Air Brush Stand 6 Ports & Pressure Guage
At a Glance; Airbrush stand and manifold with 6 ports plus a built-in pressure gauge for an organised spray station
An airbrush bench gets chaotic fast: hoses everywhere, brushes rolling aro..
R 1,608.85
Ex VAT:R 1,399.00
Model: SG AH06
AirCraft Air Hose Nylon Braided 3m 1/8x1/4 F f
At a Glance; Nylon braided airbrush hose – 1/8" BSP female to 1/4" BSP female, 3m long
When your airbrush runs 1/8" and your compressor/regulator speaks 1/4", you need a hose th..
R 155.83
Ex VAT:R 135.50
Model: SG AH05
AirCraft Air Hose Nylon Braided 3m 1/8x1/8 F f
At a Glance; Nylon braided airbrush hose – 1/8" BSP female to 1/8" BSP female, 3m long
For airbrushing, consistency isn’t just about paint and pressure—it’s also about having a hose that ..
R 145.48
Ex VAT:R 126.50
Model: SG AH03
AirCraft Air Hose Spiral 1.5m M5xm5 F f
At a Glance; Spiral vinyl airbrush hose – M5 female to M5 female, 1.5m long
When you’re doing detail work with an airbrush, a messy hose is the fastest way to ruin your flow (and your mood). The AirCraft ..
R 93.38
Ex VAT:R 81.20
Model: SG AH04
AirCraft Air Hose Spiral 3m 1/8x1/8 F f
At a Glance; Spiral vinyl airbrush hose – 1/8" BSP female to 1/8" BSP female, 3m long
Sometimes the compressor is just a little too far away for comfort—especially when you’re trying to keep a s..
R 132.25
Ex VAT:R 115.00
Model: SG BD-480
AirCraft Airbrush Finger Rest
At a Glance; Replacement finger rest for improved comfort, stability and control while airbrushing
Airbrushing is all about tiny movements and consistent control—and your hand position matters more than you’d think..
R 22.20
Ex VAT:R 19.30
Model: SG HL04
Airbrush holder - fits on an inline regulator
Holds up to 2 airbrushes at a time.
Unscrew the red plastic locking ring on the top of the inline regulator to fit the airbrush holder. Perfect for airbrush compressors...
R 112.47
Ex VAT:R 97.80
Model: SG HL01
Airbrush holder - table edge clamp
Holds up to 4 airbrushes and clamps to a table edge.
Includes bracket to mount an inline air regulator.
Suitable for all kinds of
airbrushes...
R 354.78
Ex VAT:R 308.50
Model: SG HL02
Airbrush holder - table top with suction feet
Holds up to 4 airbrushes at a time.
The steel base has 4 suction cups to secure it on a smooth table top.
Suitable for all kinds of
airbrushes...
R 354.78
Ex VAT:R 308.50
Model: SG BD-400
AirCraft Project Helping Hand With 6 Clips
At a Glance; Helping hand work holder with 6 clips for securing small projects during painting, detailing or assembly
Not everything you paint, glue, sand, or solder is polite enough to sit still. The ..
R 461.15
Ex VAT:R 401.00