Air Angle Grind. Service Kit Bearing & Rot. Axle (7/8/11/13) For At001

Extra Information

• Compatibility: For the AirCraft AT0013 125mm Proline air angle grinder (service kit for components 7, 8, 11 and 13 as per diagram reference).
• Service note: Clean bearing seats and remove old grease/debris before installing new parts to prevent premature wear.
• Inspection tip: If the old bearings failed, inspect the gear head and seals for contamination—dust in the grease often causes repeat failures.

Features

• AT0013-specific service kit Designed for the AirCraft AT0013 125mm Proline air angle grinder.
• Bearings included Supports smooth, low-friction rotation and stable spindle support.
• Rotor axle components included Restores proper alignment and dependable drive transfer.
• Complete service approach Key wear items supplied together for efficient refurbishment.

Benefits

• Reduces vibration: Fresh bearings and a sound axle help stabilise the drive and improve handling.
• Improves accuracy and control: A truer-running spindle helps discs track better and cut/grind cleaner.
• Quieter, smoother running: Worn bearings often cause noise—servicing them can restore a smooth sound and feel.
• Protects the gearbox: Better alignment reduces stress on gears and related head components.

Safety

• Wear eye and ear protection when operating and servicing pneumatic grinders.
• Disconnect the air supply and release pressure before disassembling the grinder head or fitting service parts.
• After reassembly, ensure the guard is fitted correctly and test-run the grinder in a safe area before returning to work.
• Always use accessories rated for the grinder’s operating speed and never exceed recommended air pressure.

Specifications