Professional die grinder giving complete flexibility for most grinding and polishing needs.
The die grinder has non-variable speed set to 25 000 rpm.
A compressor is required with an air flow delivery of at least 115 l/min at 6.3 Bar to make use of the die grinder.
Make sure that an in-line lubricator is fitted with pneumatic oil (AT OIL).
- Small size
- Low air consumption
- Polish rough edges
- Remove rust on steel
|consider safety for your health and the people around you|
General safety suggestions:
It is advisable to always have the following items nearby and in a good condition
|Working pressure||6.3 Bar|
|Free speed||25 000 rpm|
|Average air consumption||115 l/min|
|Suggested minimum compressor HP||2 HP|