Hose Guide Assembly (1/9-12/28) For Sg Hr22215

Extra Information

• If the hose shows flat spots, deep scuffs, or cracking near the outlet, replace the guide assembly and inspect the hose for damage.
• Ensure the reel is mounted so the hose pulls out as straight as possible—sharp angles increase guide wear.
• Check fasteners and alignment after fitting; misalignment can cause uneven roller wear and poor tracking.
• Ideal spare to keep on hand in workshops where hose reels see daily use.

Features

• Guide Roller Assembly Supports smooth hose movement during pull-out and rewind.
• SG-HR22215 Compatibility Designed as a replacement part for the SG-HR22215 auto retract hose reel.
• Reduces Friction and Scuffing Helps prevent hose abrasion at the reel outlet point.
• Improves Auto-Guide Function Helps the hose track correctly to reduce tangles and misfeeds.

Benefits

• Smoother Operation: Improves hose feed and retraction, reducing snagging and rough pull-out.
• Longer Hose Life: Less rubbing and abrasion means less chance of weak spots and leaks.
• Safer, Tidier Workspace: Reliable retraction keeps hoses off the floor and reduces trip hazards.
• Cost-Effective Repair: Replace the wear part instead of replacing the entire hose reel.

Safety

• Shut off the air supply and depressurise the hose before removing or fitting any parts.
• Keep hands clear of the reel mechanism and allow the hose to retract in a controlled manner.
• Ensure the reel is securely mounted before testing pull-out and retraction.
• Inspect the hose for damage after any feed/retract issue—do not use a damaged hose under pressure.
• Wear eye protection when working on pressurised systems and during testing.

Specifications