Hose Guide Assembly (11-13/28) For Sg Hr22309

Extra Information

• If the hose shows scuffing, flat spots, or cracking near the outlet, replace the guide assembly and inspect the hose for damage.
• Mount the reel so the hose pulls out as straight as possible—sharp side angles increase guide wear and tracking issues.
• After fitting, extend the hose fully and retract it slowly once to confirm smooth tracking and correct alignment.
• Keep the outlet area clean—grit and dried contamination can increase friction and wear on both the guide and hose.

Features

• Guide Roller Assembly Supports smooth hose movement during pull-out and rewind.
• SG-HR22309 Compatibility Designed as a replacement part for the AirCraft SG-HR22309 hose reel.
• Reduces Friction at the Outlet Helps prevent hose abrasion and scuffing where the hose exits the reel.
• Improves Hose Tracking Helps the hose rewind neatly to reduce tangles and misfeeds.

Benefits

• Smoother Operation: Less snagging and rough pull-out for a more reliable daily workflow.
• Longer Hose Life: Reduces abrasion that can lead to weak spots and leaks.
• Neater Retraction: Helps the hose rewind cleanly, keeping floors clear and work areas safer.
• Cost-Effective Repair: Replace the wear part instead of replacing the full hose reel.

Safety

• Shut off the air supply and depressurise the hose before removing or fitting any hose reel parts.
• Keep hands clear of the reel mechanism and allow the hose to retract in a controlled manner.
• Ensure the reel is securely mounted before testing pull-out and retraction.
• Inspect the hose for damage after any feed/retract issue—do not use a damaged hose under pressure.
• Wear eye protection when working on compressed air equipment.

Specifications