Hose Stopper Assembly(38/38a/39-41) For Sg Hr22309

Extra Information

• Position the stopper so the coupling sits just outside the reel outlet—accessible, but not striking the housing.
• If the hose has been snapping back hard, inspect the hose end and fitting for damage before returning the reel to use.
• Retract the hose in a controlled manner—do not allow it to whip back under full spring tension.
• Check the Documents tab (if available) or the SG-HR22309 exploded diagram for correct part placement references.

Features

• Stop Collar Assembly Designed to stop the hose end at the correct position during retraction.
• SG-HR22309 Compatibility Replacement part for the AirCraft SG-HR22309 auto retract air hose reel.
• Improves Controlled Rewind Helps prevent the coupling from snapping back into the reel casing.
• Workshop-Ready Replacement Ideal for restoring reels with missing or damaged stoppers.

Benefits

• Safer Retraction: Helps reduce snap-back risk by keeping the hose end from retracting into the housing.
• Faster Connections: Keeps the coupling easy to grab and ready for the next tool.
• Protects Hose End & Fitting: Helps reduce impact and wear at the reel outlet area.
• Cost-Effective Repair: Replace the stopper instead of replacing the whole hose reel.

Safety

• Shut off the air supply and depressurise the hose before fitting or adjusting the stopper.
• Allow the hose to retract in a controlled manner—do not let it whip back under spring tension.
• Ensure the stopper is secured properly before use; a loose stopper can slide and allow snap-back.
• Inspect the hose for scuffs, cracks, or damage near the outlet—do not use a damaged hose under pressure.
• Wear eye protection when working around compressed air systems.

Specifications